Products Description
In an aluminum product processing factory, the lathe produces a large amount of waste aluminum chips during daily cutting and grinding operations. To ensure smooth cutting and grinding, cutting oil is often added, which leaves residue on the aluminum chips. This leads to a significant accumulation of scattered aluminum chips.
The metal chip briquetter can compress these waste aluminum chips generated in the workshop. Shavings and flaky chips are first processed through a crusher before being fed into the briquetter. During the briquetting process, the cutting oil present in the chips is collected by a liquid pump for later treatment and reuse.
The compressed aluminum chips are formed into convenient briquettes, making it easier for the workshop to pack, store, and transport them. Additionally, recycling these briquettes by remelting them significantly improves furnace efficiency.
Products Specification
| Pressure Capacity: | 700 kN |
| Briquette Diameter: | 80 mm |
| Feed Opening Size： | 600 mm x 600 mm |
| Hydraulic Oil Pump： | F525 Gear Pump |
| Power： | 5.5 kW, using standard pure copper components |
| Control System： |
PLC automatic control |
| Cooling Method： | Equipped with air cooling |
| Forming Time： | Approximately 20-25 seconds per briquette |
| Feeding Method： | Screw metering feed |
| Operation Modes： | Manual and automatic |
| Oil Tank Capacity: | 100 liters |
| Dimensions: | 1200 mm x 1100 mm x 1100 mm |
Feature
1: Cutting oil recovery The oil is squeezed into the container while pressing the cake, and the recycling rate reaches 95%.
2: Saving storage space The waste compression ratio is 5:1, and the lathe waste compression ratio is 20:1, which greatly saves the use area of the workshop occupied by waste. It also saves the space of the transport compartment.
3: Saving labor time The cake press can complete the cake pressing work during the working interval. Some customer factories are equipped with full-time waste processing workers. Overall, it saves a lot of labor time compared to the previous use of the cake press.
Advantage
1. The equipment is small and does not take up space;
2. It is easy to operate and can switch between manual and automatic modes freely;
3. It operates automatically and does not require full-time waste treatment personnel;
4. The equipment will automatically stop and wait after idling for 5 times, with low power and energy consumption;
5. The hopper can be flexibly selected according to the form of the waste, making feeding and pressing smoother;
6. The movable oil collecting tank is easy to clean.
Hot Tags: metal chip briquetter, China metal chip briquetter manufacturers, suppliers, Hydraulic Alligator Shearing Machine, Horizontal Metal Baler, Hydraulic Metal Baler Machine, Scrap Metal Gantry Cutting Machine, Tiger Head Shear Machine, Copper Pipe Separation Machine
