Products Description

The hydraulic guillotine shear is hydraulically driven, with reliable safety performance and push-button operation; it can shear light and thin materials of various shapes in a cold state. This shearing machine has a large shearing force and long blade, and is suitable for cold cutting of various cross-section shapes of steel (such as round steel, square steel, channel steel, I-beam, thick steel plate, steel pipe, etc.) and various scrap metal structural parts. shear. The gantry shearing machine is equipped with an automatic feeding box as standard. That is, after the material is grabbed into the feeding box, the waste material is automatically sent to the knife edge shearing place by the conveyor belt. The feeding speed can be adjusted by a speed-regulating motor. Side extrusion cylinders are installed on both sides of the material box. If scrap, such as scrapped cars, cannot pass through the gantry shear opening, the waste can be squeezed and reduced through the side extrusion cylinder, and then sent to the shear opening through the conveyor table.

hydraulic guillotine shear

Products Specification

3	Material box size	60001700800mm
4	Hydraulic system Max Working pressure	28Mpa
5	Cutting width/minimum cutting opening	1800mm/680mm
6	Press length/feed height	900mm/1000mm
7	Main motor power of equipment	180Kw/380v /3hp /50hz
8	Power Specifications	380V/3PH,50Hz
9	Cabinet	380VPL Control, With remote control
10	Cut angle	9°
11	Number of cuts	3-4time /min(adjustable)
12	Pushing method/speed	Double chain push head feeding/230mm/s

hydraulic guillotine shear

Feature

Features of gantry hydraulic shearing machine:
1. Hydraulic transmission, low noise, multiple functions, high production efficiency, optimized structural design, stable
2. Adopting a solid open structure that is fully welded, the fuselage can maintain sufficient rigidity while having the most convenient operating space;
3. The pressing stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold;
4. It can be used for blanking, bending, flanging, thin plate stretching, fine blanking, and cold extrusion of metal parts; 5. The pressing force can be adjusted without overloading, and the control of each working step in the pressing process can be realized. Pressure holding and time delay requirements;
6. The lifting height of the press-fit spindle can be adjusted within any stroke range through a timer or position sensor; 7. Low oil pump displacement, low motor power, energy saving
8. Centralized buttons, with manual, semi-automatic, and automatic operations; 9. The hydraulic system is built into the frame, with a clean, light and stable appearance;
10. Optional: Install photoelectric protection device, automatic refueling and lubricating device, oil temperature cooling, and constant temperature device.

hydraulic guillotine shear

Application

Hydraulic guillotine shear is mainly suitable for cutting steel plates, copper plates, nickel plates, and other metal plates. Shearing force 100 tons to 250 tons. Main material size to be cut (12~20mm) *250mm. The number of cuts is 8 to 12 times per minute. This series requires simple infrastructure. Dragon shears are hydraulically driven. Compared with mechanical transmission shears, they have the characteristics of small size, lightweight, small movement inertia, low noise, smooth movement, flexible operation, and large shearing section. Hydraulic and electrical integrated control can implement single and continuous action conversion, is simple and convenient to use, can stop and run at any working position, and is easy to implement overload protection.
It has a wide range of applications. It can be used as processing equipment for metal recycling and processing units, as well as furnace charge processing in factory casting workshops and metal shearing processing equipment in the mechanical construction industry.

hydraulic guillotine shear