Pet Flakes Washing Line

The equipment process of the Pet flakes washing line:

The recycling and utilization of Pet flakes washing line to the use of waste plastic PET mineral water bottle pieces for recycling, cleaning, and granulation. The equipment on the granulation line undergoes crushing, cleaning, drying, heating, plasticization, stretching, cooling, granulation, and processing to produce PET powder and produce PET related products. But PET bottles can only be used once, which reduces the plasticity of PET plastic. Therefore, it is necessary to develop new PET plastic recycling machines.

 

Pet flakes washing line can efficiently dispose of discarded plastic bottles, crush, clean, and recycle them to achieve resource reuse and recycling. This article will introduce the workflow, environmental significance, and the importance of sustainable development of the plastic bottle crushing and cleaning line.

 

 

 

 

 

Plastic bottle recycling and collection: Waste plastic bottles first need to be collected through a recycling and collection system. This can be achieved through recycling bins, recycling stations, or recycling vehicles. During the recycling and collection process, it should be ensured that different types of plastic bottles are correctly classified for subsequent processing.

Crushing: The collected plastic bottles are fed into a plastic bottle crusher for crushing. These crushed plastic fragments help reduce volume and facilitate subsequent cleaning and treatment processes. The crushed plastic fragments usually require screening to remove impurities and mix with different types of plastic fragments.

Cleaning: The crushed plastic fragments are cleaned to remove dirt, pollutants, and other residues attached to the surface. The cleaning process is an important step in ensuring the quality of recycled plastic, as clean plastic fragments are beneficial for subsequent reprocessing and reuse.

Plastic recycling: Plastic fragments that have been crushed and cleaned can be used for the production of recycled plastic products. These recycled plastics can be used to produce new plastic bottles, containers, packaging materials, etc., reducing the demand for original ecological plastics, resource consumption, and environmental burden.

 

 

The Pet flakes washing line output is: 500, 1000, 2000, 3000, 5000 kg per hour, and the water content of the cleaned bottle label paper and bottle flakes are all below 1%. It can save a lot of subsequent energy consumption, while ensuring the quality of bottle flakes.

 

 

 

Pet flakes washing line Flow Chat

 

 

 

 

 

Number	name	specification	quantity	note
1	conveyor	length4.0m,width0.6；power3kw	1
2	Label remove machine	length6.3，diameter0.63；motor15+3+3+0.75kw	1	Round bottle 98%；pressed bottle 85-90%
3	Sorting conveyor	length6.0，width0.8；power3kw	1
4	conveyor	Length 6.0m,width0.6；power3kw	1
5	Model 80 PET crusher+conveyor	height2.6m；power37+4+1.5kw	1	1000kg/h sieve size：14-18mm
6	Washing tank	length6.0m，width1.2m，height1.2m； power 4kw	3
7	Screw conveyor	length4.0m,diameter0.32,power4kw carton steel	1
8	Hot washing pot	diameter1.3m,height2.0m;power4kw carton steel	2	Water temperature 90-100degree
	Electromagnetic heating	60kw	2
9	Screw hoist	length4.0m,diameter0.32;power4kw carton steel	2
10	Rubber washing machine	length3.0m，diameter0.4m；power5.5kw	2
11	Horizontal dryer machine	length2.5m，width0.75m；power15kw	1	drying rate about 98%
12	3 in 1 Trademark Separator+hoister	diameter0.6m，height4.0m;power2.2*3 length2.5m，diameter0.22m，power3kw	1	Optional
13	Control cabinet	length0.6，width 0.8；height1.9m	1

 

Pet flakes washing line are usually pelletized to process them into recycled plastic pellets. These recycled plastic pellets can be used in a variety of ways, here are some common ones:

Production of recycled plastic products: Recycled plastic particles can be used to produce various plastic products, such as plastic bottles, containers, packaging materials, hangers, water pipes, etc. These recycled plastic products are equivalent to original ecological plastic products in terms of function and

performance, while reducing the demand for original ecological plastics, reducing resource consumption and environmental pressure.

 

Recycled plastic film: Recycled plastic particles can be used to make plastic films, such as shopping bags, packaging films, etc. The use of recycled plastic film can reduce the need for traditional plastic film and help reduce the generation of plastic waste.

Recycled plastic fibers: Recycled plastic pellets can also be used to produce plastic fibers such as recycled polyester fibers. These recycled plastic fibers can be used to make clothing, household items, etc., reducing the demand for virgin fiber resources.

 

Recycled plastic injection molding: Recycled plastic particles can be used to manufacture various plastic products, such as home appliance casings, parts, etc., through the injection molding process. These recycled plastic injection molding products are widely used in different fields and have good market prospects.

 

Recycled plastic pipes and panels: Recycled plastic pellets can also be used to produce plastic pipes and panels, such as drainage pipes, building panels, etc. These recycled plastic products have a wide range of applications in construction and infrastructure.

Recycled plastic 3D printing materials: Recycled plastic particles can be used in the manufacture of 3D printing materials, providing important resource support for sustainable 3D printing technology.

Overall, by granulating recycled plastic fragments into recycled plastic granules, the effective reuse of plastic resources can be realized, plastic pollution and resource consumption can be reduced, and environmental protection and sustainable development can be promoted.

Hot Tags: pet flakes washing line, China pet flakes washing line manufacturers, suppliers, Automatic Dewatering Machine, Plastic Granulator Production Line, Pet Bottle Flakes Crushing Washing Line, Label Remove Machine, Friction Type Washing Machine, Plastic Recycling Machinery