Charcoal Manufacturing Machine

Charcoal manufacturing machine is the main equipment that uses wood chips, sawdust, rice husks, peanut shells, plant straw and other carbon-containing wood materials (without any additives) to make rod-shaped solid fuel under high pressure and high temperature conditions. It is also a charcoal machine equipment. One of the important supporting equipment in the production line. With its unique performance advantages, sawdust charcoal machines are increasingly used in industry, agriculture, chemical industry, metallurgy, heating, barbecue and other fields.

Main technical parameters of the sawdust briquette making machine

1. Crush the biomass wood materials through a special crusher into materials within 1cm in size and store them.
2. The crushed materials are put into the dryer for moisture drying treatment, and collected and stored after processing.
3. Add the dried materials into the charcoal making machine for shaping and production, and store the prepared charcoal rods.
4. Put the semi-finished carbon rod into the carbonization furnace for high-temperature and oxygen-free carbonization to obtain the finished machine-made charcoal.

Charcoal manufacturing machine is suitable for crushing sawdust, wood chips, bamboo chips, bark, twigs, walnut shells, chestnut shells, cotton stalks, sesame stalks, corn stalks, sunflower stalks, soybean straw, rice husks, sugarcane bagasse, corn cobs and other raw materials (The diameter is less than 6mm, such as rice husks and sawdust, which do not need to be crushed) and then mechanically extruded into four-sided, six-sided or square shaped fuel with holes.

Charcoal manufacturing machine has certain requirements on the material of the raw material itself and the moisture content of the raw material. The lignin content of the raw material is high, and the carbon content of the produced charcoal is high. In addition, the charcoal making machine generally requires the moisture of the raw materials to be between 5% and 12%. If the moisture is high, it needs to be dried first.

Machine-made charcoal equipment generally uses sawdust or rice husks as raw materials, and neither needs to be crushed. Secondly, shavings, bamboo chips, branches, wooden scraps, fruit shells, etc. are also good raw materials, but they need to be crushed first, and the requirements for the crusher are relatively high.

Hot Tags: charcoal manufacturing machine, China charcoal manufacturing machine manufacturers, suppliers, Coal Dryer Machine, Chain Type Onion Peeling Machine, Label Remove Machine, Large Wood Processing Machine, Wood Peeling Machine for Plywood, Small Wood Processing Machine