Sawdust Charcoal Making Machine

 

This is a small sawdust molding machine. The body of the sawdust charcoal making machine is made of high-quality carbon steel, and its service life can exceed 10 years. The raw materials can be various carbon-containing biomass, such as palm kernels, peanut shells, branches, logs, rice husks, etc. The size of the raw material must be less than 5mm. If the material is too large, we will recommend a crusher according to your needs. In addition to the material size must be less than 5mm, the material moisture should be kept at 12%. Too wet or too dry will affect the molding effect. If the moisture content of your material exceeds 12%, we can also recommend a sawdust dryer for you. The crushed material is sent to the dryer and then sent to the molding machine. After high-pressure and high-temperature conditions, it is made into rod-shaped solid fuel without adding any additives.

 

 

Model	Power	Capacity	Dimension
SL-50	15 kw	220 kg/h	1800*700*1500 mm
SL-60	18.5 kw	250 kg/h	1700*700*1600 mm
SL-70	22 kw	300 kg/h	1850*800*1700 mm
SL-80	30 kw	400 kg/h	2100*900*1700 mm

 

 

Peanut shell,Rice husk,Sawdust,Little branch,Corn cob,Bagasse,Leaves,Logs,Palm kernel,Nuts shell,Straw,Bamboo,Cotton stalk,ect.If you unsure material is ok,please send to us,will offer free test service for you.

The work principle of this sawdust charcoal making machine is sawdust was putted into machine,the screw will push material into sleeve.After high temperature and high pressure, the raw materials are extruded into different shapes.

 

 

 

The sawdust charcoal making machine uses sawdust, crop straw (corn stalk, soybean stalk, sorghum stalk, cotton stalk, rape stalk, peanut seedling, sunflower stalk), rice husk, grass, shrub branch, bamboo and wood cut, material head, sugarcane The slag is used as the raw material. After being pulverized by the sawdust crusher, a high-temperature and high-pressure zone is formed under the action of the screw propeller and the heating ring to process the loose raw material into a hollow rod. The product has high density, small size and good flammability, and can replace firewood and coal. Generally, the outer diameter of the product is 50-60mm, the hole diameter is 15-20mm, and it is in the shape of a hollow square or hexagonal column. It can also be made into spherical, granular, and briquette shapes.

 

1. This sawdust charcoal making machine has the characteristics of reasonable design, reliable manufacturing quality, simple structure, convenient operation, small volume, less land occupation, labor saving and power saving.

2. The designed fully automatic control electric heating device can randomly adjust the dry humidity of the material to ensure the stable forming of the material and improve the work efficiency.

3. The main parts of this sawdust charcoal making machine are made of wear-resistant materials after special treatment, so it can be produced by continuous pressing and durable.

4. The sawdust charcoal making machine is suitable for compression molding of various biomass raw materials, with low energy consumption and high production efficiency.

5. Change the three bearings of the old-fashioned movement to four, which increases the stability and durability of the machine.

6. Change the old-fashioned oil-coated lubrication to oil-immersed lubrication. As long as there is no shortage of oil, it can be used for many years.

7. Increase the screw pitch to increase the feeding amount, thus greatly increasing the output.

8. The structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased.

 

 

Hot Tags: sawdust charcoal making machine, China sawdust charcoal making machine manufacturers, suppliers, Coconut Shell Charcoal Making Machine, Briquette Machine, Charcoal Making Machine, Sawdust Charcoal Making Machine