Automatic Peanut Sheller

Peanut shelling machine, seed shelling machine price, household two-phase electric peanut seed shelling machine

Suspension casing shelling is used, wind power is used for primary selection and specific gravity is used for secondary separation and cleaning. The final peanut kernels can be automatically transferred into sacks, with a simple and compact structure, and flexible and simple operation. It is easy to maintain, has high shelling efficiency, and good performance. It is a suitable peanut shelling equipment for individual households, grain depots, oil processing plants, and food industries. The peanuts enter the front roller from the feeding hopper, and the peanuts are peeled apart by the rotation of the suspension sleeve and the friction of the concave plate to separate the kernels and shells; the separated peanut kernels and shells fall through the front concave plate at the same time and pass through the front slide In the air duct, the peanut shells are blown out of the machine by the wind to achieve the primary wind selection; the peanut kernels and the peanut pods that have not been shelled fall into the specific gravity separation screen together, and the final peanut kernels go up along the screen surface and pass through the kernel outlet into the sack; The peanuts that have not been shelled will go down along the screen surface and enter the air conveyor through the discharging trough. The air conveyor will send them to the rear drum for secondary shelling; the peeled kernels and shells will pass through the rear concave plate. Falling down, and then through the wind primary selection and specific gravity separation, all shells can be peeled off.

Name	Dust collecting peanut shelling machine
Size	1400*800*1600mm
Feeding volume	1000-1500 catties/hour
Power	380v 3kW
Speed	2400 rpm
Weight	140kg

1. Before using the peanut peeling machine, you should check whether the fasteners are tightened, whether the rotating part is flexible, whether there is lubricating oil in each bearing, and whether the peeling machine is placed smoothly.

2. Before turning on the power, use manpower to turn the peanut peeling machine several times. If there is a crashing sound, find out the cause and then turn on the power again.

3. After powering on, a test run should be performed first and attention should be paid to whether the rotation of the rotor is correct. After the motor is started, the rotation of the rotor should be consistent with the direction marked on the machine tool. Run idling for a few minutes and observe whether there are any abnormal noises. Only after the operation is normal and stable can the peanuts be put into the hopper quantitatively, evenly, and continuously.
4. There are also requirements for the dryness and wetness of peanuts, that is, the peanuts should not be too dry or too wet. If it is too dry, the peanut crushing rate will be high; if it is too wet, the shelling speed will be slower. In winter, peanuts stored in rural areas are generally dry. To make them dry and wet, the following method can be used: Spray about 15 kg of warm water evenly on 100 kg of peanuts, cover them with plastic film for about 10 hours, and then dry them in the sun. Shelling can begin in about 1 hour. In other seasons, it only takes about 6 hours to cover with plastic film, and the rest of the operations are the same.
5. The solution to the increase in peanut shells is to move the motor downward to tighten the fan belt and increase the air-blowing volume.
6. When peeling, the peanuts should be fed evenly and in an appropriate amount. Iron filings, stones, and other debris are not allowed to be mixed in to prevent the peanut kernels from being broken or causing mechanical accidents.

1. Hair dryer: Blow the peanuts that have not been removed in the first studio to the second studio for work.
2. Vacuum pipe: can vacuum away the dust inside the working sieve.
3. Specific gravity separation screen: It can make the heavy ones go up and the light ones go down, and separate the small and large fruits.
4. The peanut shells and dust will be blown away in this round air dryer. You can make a cloth bag and put it on it, so that the peanut shells and dust will enter the cloth bag and prevent it from flying around.
5. Repeated removal: Peanuts that were not completely removed for the first time will automatically be removed again for the second time.

Established in 2011, Zhengzhou Shuliy Machinery Co., Ltd has always adhered to the development concept of environmental protection, committed to the research of recycling machinery.

So far, we have produced more than 30 kinds of recycling machines, including plastic granulator machines, egg tray machines, copper wire recycling machines, shredder machines, etc. We always focus on quality throughout the whole process of production and services.

In addition, Shuliy has a group of professional technical and sales teams, who concentrate on providing customers with a complete set of production programs, giving full play to the economic value, use value, and environmental protection value of the machine, and helping earn more benefits for customers. At present, Shuliy machines have been exported to the United States, Canada, Australia, Malaysia, Indonesia, South Africa, and other countries. In the future, Shuliy Group will as always create more value together with you.

With the unique effect of high automation, and stable and reliable performance, the company has won the trust and good evaluation of many customers

Hot Tags: automatic peanut sheller, China automatic peanut sheller manufacturers, suppliers, Agricultural Machine, Automatic Fish Feed Pellet Machine