Agricultural Chaff Cutter

The agricultural chaff cutter is suitable for processing forage such as elephant grass, bamboo grass, sorghum grass, Mexican corn straw, etc. It can be used both dry and wet, and can also be used to powder cornmeal. The base is made of thickened angle iron, and it uses a pure copper high-power motor. The cutter head is cut by a large-diameter laser. The cutter head, and the thickened 5-cutterhead, is different from the three small cutter heads of other manufacturers, which improves the machine output rate. The 56 titanium alloy knives are widened and thickened, which are wear-resistant and durable.

Name	agricultural chaff cutter
Capacity	800kg/h for crushing grains,1500kg/h for silage, 700kg/h for dry straw
Power	3kw motor,gasoline engine
Size	1050*600*1100mm
Weight	110Kg

1. Low noise, separate collecting room, and dust collecting room. The dust can be fully collected to meet the user's requirements for cleanliness; the whole machine is balanced and stable, and the noise is reduced.

2. The crushing knife set is equipped with blades to increase the airflow in the crushing chamber. It can discharge materials quickly and reduce the production temperature during crushing. It is more suitable for crushing some materials with poor fluidity and viscosity.

3. Equipped with screens of various specifications to meet various fineness requirements, easy to operate and easy to maintain.

4. Suitable for a variety of raw materials and can meet the production requirements of most users.

5. There are two forms with and without shakron.

1. Crusher structure: It consists of a grinding head, fan, sacron, screen, hopper, V-shaped pulley, motor, and other components.
2. Instructions for use: The main end of the pulverizer has a hopper. There is a feed adjustment insert plate on the bottom of the hopper. According to the fragility and crushing fineness of the material, the adjustment insert plate should be adjusted to the exact size (blanking size). position and lock.
3. Discharging method: There is a discharging port at the bottom of the machine. If the material is discharged with the air volume and causes a slight spraying phenomenon, a bag should be added to the discharging and feeding area to allow the material to slowly overflow through the bag.
4. Precautions: Before working, idle for 1-2 minutes before feeding. It is strictly forbidden to discharge the material first and then turn on the machine. During work, the material must be discharged in time to ensure that the bag is well ventilated. It should be idle for 1-2 minutes before shutting down to allow the machine room to Clear out the materials and close the feeding insert plate to prevent foreign matter from falling in. Strictly remove stones, metal, and other impurities from the processed products, and do not allow them to enter the machine to avoid damaging the machine parts.

Agricultural chaff cutter working process When the machine is working, the processed materials enter the crushing chamber from the hopper and are shattered by the impact of the high-speed rotating working parts. At the same time, the movement direction of the material is changed. Due to the high-speed rotating working parts, the material layer is destroyed. Sedimentability, therefore, the material moves with the rotor. During this process, the particles are repeatedly subjected to collisions between the working parts and the machine body, as well as collisions and frictions between particles, and are gradually crushed until their geometric diameter is smaller than the diameter of the sieve holes. Under the action of centrifugal force and airflow, the crushed materials pass through The sieve holes leak into the powder chamber, and are discharged from the discharge port.

Hot Tags: agricultural chaff cutter, China agricultural chaff cutter manufacturers, suppliers, Automatic Fish Feed Pellet Machine, Agricultural Machine