Sawdust Block Making Machine

This sawdust block making machine mainly uses waste materials such as shavings and sawdust, mixes them with glue, dries, sizing, and

heats, and presses the hot press to produce wood shavings and wood chips. a. The vertical holding force of the screw is 1590N. It is an ideal

material for making fumigation-free wooden pallet brackets (foot piers, legs). This product is mainly used to replace the foot piers used on log

pallets, free of fumigation and heat treatment. The structure of the equipment is simple, the operation is convenient, the bakelite block produced

is clean and environmentally friendly, and the market prospect is broad.

The investment in this equipment is only less than one-third of that of ordinary trigger machines. Due to the different production process principles,

the gloss and water resistance of the products produced are comparable to those of wood chips pier sawed by pressing thick shavings and sawing

boards.

 

 

 

 

MODEL	PRODUCTIVITY	DIMENSION	WEIGHT
SL-75/2	3.5m3/24h	75*75*1200mm	1500KG
SL-90/2	4m3/24h	90*90*1200mm	1800KG
SL-100/2	5m3/24h	100*100*1200mm	2000KG
SL-120	3.5m3/24h	100*120*1200mm	1500KG
SL-145	3.5m3/24h	145*145*1200mm	1800KG

 

The wooden pier machine generally uses waste such as shavings, sawdust, rotten wood boards, and branches as raw materials. The raw

materials are first screened and classified to prevent the machine from being damaged due to the hard sundries such as metal in the raw materials.

The raw materials are pulverized by a pulverizer (when the raw material is less than 5*5mm, it is not necessary to pulverize), and then enter the

dryer to dry. After the glue mixer is applied, the sawdust block making machine is hydraulically formed, extruded into wooden pier products, and

finally cut into small square products required by customers.

1. Compared with multi-layer boards, the specifications are unified and the appearance is consistent, which improves the appearance and

grade of the product;

2. Smooth on all sides, no need to polish; good water resistance (no cracking after soaking in water for 48 hours, no cracking under wind and sun),

strong nailing force. Different from the sawdust pier cut by the whole board, the surface is rough and easy to drop slag;

3. Uniform heating around and in the middle, the glue is cured thoroughly, and the product has high strength;

4. The surface is smooth, water is not easy to penetrate, and the fiber binding force of the shavings itself makes the product have excellent

water resistance.

Hot Tags: sawdust block making machine, China sawdust block making machine manufacturers, suppliers, Wood Block Machine, Other Wood Processing Machine, Wood Pallet Block Making Machine