Products Description

This slicing and shredding machine is designed and produced for fibrous fruits and vegetables. The long plantain chips slicer is mainly used for slicing and shredding ginger, old ginger, fresh bamboo shoots, sour bamboo shoots, lettuce, and other vegetables. It is a dual-purpose machine. The blade is sharp and durable and is made of 304 stainless steel. You can cut ginger slices, and long banana slices, shred ginger, and use different blades to cut out different shapes. Cutting is even and fast. The whole long plantain chips slicer machine has good balance, fine cutting accuracy, and good stability. The parts that contact the food are made of aluminum alloy, which is corrosion-resistant and will not rust after long-term use.

long plantain chips slicer

machine operation

1. Before cutting materials, run the machine empty for about half a minute to ensure that the machine operates normally before adding materials to protect the motor.
2. When cutting bulb materials, the materials need to be cleaned until there is no mud, otherwise the blade will be damaged.
3. When cutting rhizome materials, do not use objects that are too large, too hard, or have too much fiber to avoid damaging the blade and burning the motor. Oversized objects should be cut into small pieces manually and then put into the machine.

long plantain chips slicer

machine repair and maintenance

1. After the work is completed, it should be cleaned in time.
2. When sharpening the knife, you do not need to remove the knife from the long plantain chips slicer machine. Just use a whetstone to grind on one side of the knife. If the blade is seriously damaged, you can use a wrench to remove the knife and grind it repeatedly. Do not overheat the knife during grinding to prevent annealing.

long banana chips slicer

machine parameter

Model	TZ-150	TZ-500
Voltage	220V	220V
Power	0.375KW	0.75KW
Weight	43KG	75KG
Dimension	530430600mm	640470840mm
Capacity	150-250KG/H	500-800KG/H
Cutting size	1.5mm/2mm	2mm/2.5mm/3mm/4mm