The almond cutting slicing machine is a special equipment for slicing peanuts, almonds, cashews, walnuts and other nuts. The working principle of the peanut slicer: Put the material into the hopper, and adjust the quantitative gate of the hopper so you can adjust the feeding amount of peanuts. The peanuts fall to the cutter head, and the cutter head rotates at high speed to slice the peanuts.
|
Model |
TZ-2 |
|
Power |
1.5KW,220V/380V |
|
Output |
50-300kg/h |
|
Dimension |
900*550*1900mm |
|
Slicing thickness |
0.05-1.2mm |
|
Weight |
170kg |
|
Material |
Touch food part is stainless steel |
1. The nuts to be sliced by the almond cutting slicing machine should not be too dry. They should be soaked first and then dried before slicing. If the material is too dry, the slices are easy to break. If the moisture content is too high, it may cause material to accumulate on the cutter head and discharge port.
2. Nuts should be selected and processed, and there should be no debris such as sand and stones in them, otherwise the blade will be damaged.
3. Kinfe cutter, the thickness can adjust, generally 1mm stainless steel blade, disk aluminum alloy. The blade is made of high-quality steel, with a sharp edge and long service life.
4. The contact part between the almond cutting slicing machine and the material is made of stainless steel, which meets the requirements of food hygiene
5. When you want to change the thickness of the slice, you can adjust the nut under the cutter head in a clockwise direction to increase the thickness of the slice, and vice versa to decrease the thickness. It can be adjusted according to requirements and then re-tighten the nut after adjustment.
Hot Tags: almond cutting slicing machine, China almond cutting slicing machine manufacturers, suppliers, Macadamia Nuts Production Line, Almond Cutting Slicing Machine, Automatic Almond Shelling Machine, Almond Machine
